Advertisement
June 2021© Toro Groundsmaster 360 ROPS Cab Installation Manual
5. Locate the hole, shown below, in the front right of the operator foot platform. Drill hole out
to ½". This is the front right ROPS fastening location.
6. Return to the cab to install lift brackets next. To remove the gas shock on the left cab door,
slide a flat screwdriver underneath the small clip on the end cap that must be pulled UP order
to pop the shock off of the ball stud. The shock will release very easily when this is
accomplished. Lift the door assembly straight up and off of the cab and put aside for now.
Advertisement
