Miele professional PT 5136 Operating And Installation Instructions
  1. Manuals
  2. Brands
  3. Miele professional Manuals
  4. Dryer
  5. PT 5136
  6. Operating and installation instructions

Miele professional PT 5136 Operating And Installation Instructions

Vented tumble dryer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Operating and installation instructions
for vented tumble dryer
PT 5136
en - GB
To avoid the risk of accidents or
damage to the machine, it is
essential to read these instructions
before it is installed, commissioned
and used for the first time.
M.-Nr. 09 870 150

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PT 5136 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Miele professional PT 5136

Summary of Contents for Miele professional PT 5136

  • Page 1 Operating and installation instructions for vented tumble dryer PT 5136 en - GB To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed, commissioned and used for the first time.

  • Page 2: Caring For The Environment

    Caring for the environment Disposing of the packing Energy saving tips material To avoid unnecessarily long drying times and high consumption of energy: The transport and protective packing has been selected from materials which – Make sure that your laundry is are environmentally friendly for disposal thoroughly spun before drying.

  • Page 3: Table Of Contents

    Contents Caring for the environment ......... . 2 Warning and Safety instructions .
  • Page 4 Contents Problem solving guide ..........35 Problem solving guide .
  • Page 5 Contents Technical data ........... 56 Settings menu .

  • Page 6: Warning And Safety Instructions

    Warning and Safety instructions It is essential to read these instructions. This tumble dryer complies with current safety requirements. Inappropriate use can, however, lead to personal injury and damage to property. To avoid the risk of accidents and damage to the tumble dryer, please read these instructions carefully before using it for the first time.
  • Page 7 Warning and Safety instructions The tumble dryer can only be used by people with reduced physical, sensory or mental capabilities, or lack of experience or knowledge, if they are are supervised whilst using it or have been shown how to use it in a safe way and recognise and understand the consequences of incorrect use.
  • Page 8 Warning and Safety instructions The electrical safety of this tumble dryer can only be guaranteed when correctly earthed. It is essential that this standard safety requirement is met. If in any doubt, please have the electrical installation tested by a qualified electrician. Miele cannot be held liable for the consequences of an inadequate earthing system (e.g.
  • Page 9 Warning and Safety instructions Please observe the instructions in "Installation and connection" and "Technical data". The socket must be easily accessible after installation in order to disconnect the tumble dryer from the electricity supply. For hard-wired machines, the all-pole isolator provided on-site must be easily accessible after installation in order to disconnect the tumble dryer from the electricity supply.
  • Page 10 Warning and Safety instructions Correct use The maximum load of dry laundry for this tumble dryer is 6.5 kg. See the Programme chart for the maximum recommended loads in individual programmes. Do not let anyone sit or lean on the door, as this can cause the tumble dryer to tip up.
  • Page 11 Warning and Safety instructions The tumble dryer must only be used when it is connected to a suitable ducting system. The installation site must be adequately ventilated. The ducting must not be connected to – a chimney or vent flue which is in use, –...
  • Page 12 Warning and Safety instructions If more than one tumble dryer is being installed using a joint ducting system, each dryer must have its own non-return flap to the joint ducting system. Otherwise the dryers could be damaged, endangering their electrical safety. The fluff filter must be cleaned regularly.
  • Page 13 Warning and Safety instructions To prevent the risk of fire, the following textiles must not be dried in this tumble dryer: – items which have not been washed. – items, such as workwear, which have not been thoroughly cleaned and which are still soiled with grease, oil or other deposits (such as cosmetics, lotions etc).
  • Page 14 Warning and Safety instructions Danger. This tumble dryer must not be connected to a controllable socket (e.g. a timer switch or a peak load shut-off device). If the dryer programme were to be interrupted before the end of the cooling down phase, the laundry could self-combust. To prevent the risk of fire, the following must not be tumble dried: –...
  • Page 15 Warning and Safety instructions Benzine, petrol, paraffin or any easily flammable liquid must not be stored or used near the tumble dryer. Danger of fire and explosion. Do not allow air contaminated with chlorine, fluorine or other vapours containing solvents to get into the tumble dryer. Fire hazard.
  • Page 16 Warning and Safety instructions Accessories Only use genuine Miele original spare parts and accessories with this tumble dryer. If non-Miele parts are used, guarantee, performance and product liability claims may be invalidated. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory).

  • Page 17: Operating The Tumble Dryer

    Operating the tumble dryer Control panel a Display f Low temperature button The display lights up when the For drying delicate fabrics (Care label symbol r). machine is switched on. As soon as the dryer is ready to use, g Programme selector the Entry menu appears in the The programme selector can be display.

  • Page 18: Display

    Operating the tumble dryer Display The following are shown in the display: – Programme selection – Programme duration and the programme start and end time The following are selected via the display – Special programmes Automatic (if activated) Denim Shirts –/+ buttons Outerwear Proofing...

  • Page 19: Before Using For The First Time

    Settings menu. the Entry menu appears. : 00 When the tumble dryer is switched on for the first time, the Miele Professional welcome screen will appear. Set the time of day ^ Set the hour with the - and + buttons,...

  • Page 20: Notes And Tips On Laundry Care

    Notes and tips on laundry care 1. Sort the laundry – New dark-coloured garments should be washed and dried separately Garment care label symbols from light-coloured garments the first few times they are washed, to avoid Drying the risk of colours running and Normal/higher temperature discolouring other garments or even the plastic components in the tumble...

  • Page 21: Load The Tumble Dryer

    Notes and tips on laundry care 2. Load the tumble dryer 3. Select a programme – On many programmes, different Using the tumble dryer drying levels can be selected incorrectly could cause a fire. Read depending on individual the "Warning and Safety instructions" requirements before using the machine.

  • Page 22: Short Instructions

    Short instructions A Sort the laundry It is very important to read the "Notes and tips on laundry care" section before proceeding. B Load the tumble dryer To avoid damaging your laundry, when shutting the door check that no items of laundry have become trapped in the door opening.
  • Page 23 Short instructions To select a Special programme C Select a programme A selection of programmes will appear ^ Press the On/Off button s briefly to in the display when you select Special switch on. programmes. Please note: Denim – If no further selection is made within 15 minutes, the dryer will switch off Shirts automatically.
  • Page 24 Short instructions Low temperature button Changing the programme sequence ^ For drying particularly sensitive Further information about the following fabrics (care symbol r), e.g. can be found under "Changing the acrylics, press the Low temperature programme sequence": button. – Coin box Because the heater rating is reduced –...
  • Page 25 Short instructions Before the end of a programme There is a cooling down phase at the end of the drying sequence: Cooling down will appear in the display. The programme will not finish until the cooling down phase has been completed.

  • Page 26: Delay Start

    Delay start To begin delay start Depending on the Delay start setting, ^ Press the Start button. you can set the time you wish a programme to finish or start at, or you Normal can delay the start of the programme. Factory default: Delay start not activated.

  • Page 27: Programme Chart

    Programme chart Basic programmes Cottons max. 6.5 kg Normal+, Normal** Use for – Single and multi-layered cotton fabrics such as: – Towelling, T-shirts, underwear, flannelette bed linen and baby clothes. – Workwear, jackets, cotton blankets, aprons, face flannels, tea towels, bed linen, towels, table linen that can be washed hot, overalls.
  • Page 28 Programme chart Towelling max. 6.5 kg Normal+ Use for – Large quantities of single-layer and multi-layer towelling items. – Towels, dressing gowns, face flannels, towelling bedding. Smoothing max. 3 kg Use for – Cotton and linen fabrics. – Minimum iron mixed fibre, cotton or synthetic fabrics, e.g.: trousers, anoraks, shirts.

  • Page 29: Special Programmes

    Programme chart Special programmes Denim max. 3.5 kg Normal, Hand iron r Use for – Denim garments, e.g. jeans, jackets, skirts, shirts. Shirts max. 2.5 kg Normal, Hand iron r Use for – Shirts and blouses. Outerwear max. 3.5 kg Normal, Hand iron r Use for –...
  • Page 30 Programme chart Standard pillows max. 2.5 kg Normal Use for – Feather or down pillows. – Quantity: 2 pillows 80x80 cm Delicates max. 4 kg Normal+, Normal, Hand iron r Use for – Delicate cotton, synthetic and mixed fibre fabrics –...
  • Page 31 Programme chart Basket programmes (20-90 min) Note – The drying basket (optional accessory) must be in place when items are dried or aired using this programme. – To prevent the risk of damage when the drum rotates, do not place large items which could come into contact with the drum or drum ribs in the drying basket (e.g.

  • Page 32: Changing The Programme Sequence

    Changing the programme sequence Payment system Adding or removing laundry after a programme has started Opening the door or cancelling the programme after it has started may The laundry, the drum and the cause loss of credit (depending on back of the machine all become how the machine was set up*).

  • Page 33: Cleaning And Care

    Cleaning and care ^ Remove any fluff from the hollow part Cleaning the fluff filter of the door opening. You could also The fluff which is created by the drying use a cleaning brush which is process is collected in the fluff filter in available as an optional extra from the door.

  • Page 34: Cleaning The Grilles In The Drum Aperture

    Cleaning and care Cleaning the grilles in the Cleaning the tumble dryer drum aperture Disconnect the machine from the Clean the grilles in the drum aperture mains electricity supply. and also the airways underneath them from time to time. Do not use solvents, abrasive cleaners, glass cleaners or all-purpose cleaners.

  • Page 35: Problem Solving Guide

    Problem solving guide Problem solving guide With the help of the following notes minor faults in the performance of this dryer, some of which may result from incorrect operation, can be put right without contacting the Service Department. Repair work to electrical appliances should only be carried out by a suitably qualified person in accordance with current local and national safety regulations.
  • Page 36 Problem solving guide Problem Possible cause Remedy Power failure If the dryer is switched off – After switching the dryer Programme during a drying programme on / power has been stopped or there has been a power restored, confirm with OK cut: and start the programme again.

  • Page 37: An Unsatisfactory Drying Result

    Problem solving guide An unsatisfactory drying result Problem Possible cause Remedy The laundry is not The load consisted of – Finish drying using the sufficiently dry. different fabrics. Warm air programme. – Select a different programme next time (see "Programme chart").

  • Page 38: Other Problems

    Problem solving guide Other problems Problem Possible cause Remedy The drying You might be asked to Please check all possible process goes on clean the ducting causes, described below. too long or even system/filters again. switches off. The fluff filter is blocked. –...
  • Page 39 Problem solving guide Problem Possible cause Remedy There is a build-up There is more than one – The dryer must only be of condensed water tumble dryer vented connected to a joint ducting in the drum. together. system if a non-return flap is in place.
  • Page 40 Problem solving guide Problem Possible cause Remedy The programme does No obvious cause. – Is the dryer switched not start and the display is dark. – Is the door closed properly? – Has the fuse or circuit breaker tripped? When the power comes back on after a power cut, confirm with OK and start the programme...

  • Page 41: Changing The Lamp

    Problem solving guide Changing the lamp The lamp specification and Disconnect the tumble dryer from maximum wattage is stated on the the mains electricity supply. data plate and on the lamp cover. ^ Open the door. ^ Replace the lamp. ^ To close the cover push it upwards You will find the interior lamp cover at the top of the drum aperture.

  • Page 42: After Sales Service

    After sales service Repairs PC / Optical interface In the event of any faults which you The indicator or check light marked PC cannot remedy yourself, or if the tumble on the fascia panel is the interface used dryer is under guarantee, please by Miele service technicians during contact servicing work for testing purposes and...

  • Page 43: Installation And Connection

    Installation and connection Front view a Vent ducting g Fixing bracket (for installing on a concrete plinth) b Mains connection cable c Control panel d Door e Four height adjustable screw feet f Plinth...

  • Page 44: Side View

    Installation and connection Side view View from above Rear view Washer-dryer stack a Protruding lid (see arrows) for The tumble dryer can be combined with holding when moving the machine a Miele washing machine in a washer-dryer stack. A stacking kit is b Steel plinth base (optional required which can be purchased from accessory, available open or closed)

  • Page 45: Installing The Tumble Dryer

    Installation and connection Installing the tumble dryer Levelling the machine Make sure the dryer door can be opened without hindrance after installation. Transporting the dryer to its installation site The machine must be perfectly level to ensure safe and proper operation. When moving the dryer hold it by the lid where it protrudes to the rear.

  • Page 46: Securing The Tumble Dryer Against Slippage

    Installation and connection Payment system A ventilation gap of 10 mm must The dryer can be fitted with a payment be maintained between the base of system (optional accessory). the machine and the floor. It must This must be connected and not be blocked by deep pile programmed by a Miele Service carpets, plinths, etc, which would...

  • Page 47: Electrical Connection

    Installation and connection Electrical connection If the machine is disconnected All electrical work must be from the electricity supply adequate carried out by a suitably qualified measures must be taken to ensure and competent person in that the machine cannot be accordance with current local and reconnected to the electricity supply national safety regulations (BS 7671...

  • Page 48: Single Phase Ac 230 V - Country Variant

    Installation and connection Single phase AC 230 V - country variant This device is intended for connection to a power supply system where the maximum value of external phase neutral loop impedance Z 0.39 Ohms at the point of distributor supply connection is not exceeded.

  • Page 49: Installation - Extraction Ducting

    Installation - extraction ducting General Avoid: – very long ducting systems. Before operating the tumble dryer, a suitable ducting system – too many tight bends or corners. must be installed to carry the moist Otherwise the drying result will be less air from the dryer to the outside.

  • Page 50: To Calculate The Total Duct Length

    Installation - extraction ducting To calculate the total duct 4. Refer to Table II for the appropriate duct diameter required. length Table I Friction against the inner walls of the vent ducting will slow down the Component Additional duct expelled air as it passes through the length ducting.

  • Page 51: Calculation Example

    Installation - extraction ducting Installation to the rear, left or Calculation example right hand side of the machine To the rear The connection is opened at the factory. ^ Fit one of the venting systems described on the following pages. To the left or right side of the machine.

  • Page 52: Venting System With Plastic Piping

    Installation - extraction ducting Venting system with plastic piping An adapter for installing piping is supplied with the dryer. Plastic piping is a good option where the vented air has to be ducted for some distance. The smooth walls of the pipe are less resistant to vented air than the walls of a flexible vent hose, for example.

  • Page 53: Venting System With Flexible Ducting

    Installation - extraction ducting Venting system with flexible Example ducting Window vent This is a simple method of directing the moist air outside using an adapter*. The following items are required: – flexible ducting hose* – an adapter* for flexible ducting hose –...
  • Page 54 Installation - extraction ducting Connection to an exhaust flue 1. Pipe with connection piece (= supplied with wall vent kit) 2. Adapter for flexible ducting hose 3. Exhaust flue insulated against damp The exhaust air must not be vented into a chimney or vent flue which is in use, nor should it be connnected to ducting which ventilates rooms with fireplaces.

  • Page 55: Main Venting Duct

    Installation - extraction ducting Main venting duct There must be one non-return flap per dryer installed directly on the main venting duct R. Additional Miele accessories* are required for this purpose, otherwise the dryers could be damaged and their electrical safety compromised. Where three to five dryers are being installed, the pipe diameter D must be increased.

  • Page 56: Technical Data

    Technical data Height 850 mm Width 595 mm Depth 710 mm Depth with door open 1188 mm Weight 53 kg Drum volume 130 litres Maximum capacity 6.5 kg dry weight Length of connection cable 1600 mm Voltage Connected load Fuse rating See data plate Lamp wattage Test certificates awarded...
  • Page 57 Changing default settings Default settings can be altered to adapt the tumble dryer to different requirements. Depending on the programmable status, the Settings/Supervisor level menu can be locked with a code to prevent it being accessed by unauthorised personnel (the Language J setting can still be altered).

  • Page 58: Settings Menu

    Settings menu Opening the Settings menu Closing the Settings menu Back A If the Settings menu is not locked, some of the settings may be Language F changed. Supervisor level A The entry menu showing the current ^ Select Back and confirm your time of day will appear after the dryer selection with the OK button.

  • Page 59: Language J

    Settings menu Language J You can select the language displayed via the Languages J sub-menu. Enter code The flag after the word Language acts ^ Use the + button to enter the first as a guide to prevent a language which number.

  • Page 60: Anti-Crease

    Settings menu Anti-crease Time of day At the end of the programme the First select whether you want the drum can be set to rotate at intervals clock displayed as a 24 hour or 12 for one or two hours to prevent hour clock, or to not display it at all.

  • Page 61: Standby

    Settings menu Standby You cannot extend the cooling down time for the Warm air, Cool air, To save energy, the display goes out Woollens handcare or Smoothing after 10 minutes and the indicator programmes. light for the Start button flashes slowly.

  • Page 62: Clean Out Airways

    Settings menu Clean out airways Delay start The electronic unit in the dryer You can set a later start time using detects the degree of a blockage Delay start (see "Delay start"). caused by fluff or detergent residues You can decide how this time is in the fluff filter or ducting, and the displayed.
  • Page 64 United Kingdom Miele Co. Ltd. Fairacres, Marcham Road Abingdon, Oxon, OX14 1TW Customer Contact Centre Tel: 0330 160 6600 Malaysia E-mail: mielecare@miele.co.uk Miele Sdn Bhd Internet: www.miele.co.uk Suite 12-2, Level 12 Menara Sapura Kencana Petroleum Australia Solaris Dutamas No. 1, Jalan Dutamas 1 Miele Australia Pty.

Table of Contents