Operating Modes; Scan Mode - Datalogic QuickScan QBT2500 Quick Reference Manual

GREEN SPOT DURATION (CONTINUED)
★ = default value

OPERATING MODES

Scan Mode

The reader can be set to operate in one of several scan-
ning modes. See the PRG for more information and set-
tings for any of the following options:
Trigger Single (Default)
typical handheld reader operation. When the trigger is
pulled, illumination is turned on and the scanner attempts
to read a label.
Scanning is activated until one of the following occurs:
the programmable Scanning Active Time
•
a label has been read
•
the trigger is released
•
Trigger Hold Multiple -
ning starts and the product scans until the trigger is
released or Scanning Active Time
does not disable scanning. Double Read Timeout
vents undesired multiple reads while in this mode.
Trigger Pulse Multiple -
is pulled and continues after the trigger is released, until
the trigger is pulled again or until the programmable Scan-
ning Active Time
1. See the Product Reference Guide (PRG) for these and other pro-
grammable features.
Medium (500 ms)
Long (800 ms)
This mode is associated with the
When the trigger is pulled, scan-
Scanning begins when the trigger
1
expires. Reading a label does not disable
1
expires. Reading a label
QUICK REFERENCE GUIDE
Operating Modes
1
expires
1
pre-
27