Datalogic QuickScan QBT2500 Quick Reference Manual page 38

Operating Modes
scanning. Double Read Timeout
tiple reads while in this mode.
Flashing -
regardless of the trigger status. Code reading takes place
only during the Flash On Time
prevents undesired multiple reads.
Always On -
is always ready for code reading. Double Read Timeout
prevents undesired multiple reads.
Object Detection -
its field-of-view. The Aiming Pattern is always on to show
the optimum reading area. If a predefined amount of
movement is detected, the red illumination switches on.
Scanning continues until a label is read or Scanning Active
1
Time expires.
1. See the Product Reference Guide (PRG) for these and other pro-
grammable features.
28
QUICKSCAN™ QBT/QM2500
The reader illuminator flashes on and off
The illuminator is always ON and the reader
The scanner looks for changes within
SCAN MODE
ENTER/EXIT PROGRAMMING MODE
★ Trigger Single
Trigger Hold Multiple
Trigger Pulse Multiple
1
prevents undesired mul-
1
. Double Read Timeout
1
1