Numlock - Datalogic QuickScan QBT2500 Quick Reference Manual

Numlock

NOTE: Factory defaults are based on the interface
type. Be sure your reader is configured for the
correct interface before scanning this label. See
"Selecting the Interface Type" on
more information.
NUMLOCK
This option specifies the setting of the Numbers Lock
(Numlock) key while in keyboard wedge interface. This
only applies to alternate key encoding interfaces. It does
not apply to USB keyboard.
★ Numlock = Numlock key unchanged
★ = default value
24
QUICKSCAN™ QBT/QM2500
Reset Default Settings
NUMLOCK
ENTER/EXIT PROGRAMMING MODE
Numlock = Numlock key toggled
page 15 for