Travis Industries Fireplace Xtrordinair 864 GSR2 Owner's Manual page 30

With ember-glo lights
Table of Contents

Advertisement

30
Ember Installation
A bag of embers is provided to further enhance the firebox. Place the embers on the firebox floor and on
the burner. Do not place embers over any of the burner holes or air channels.
NOTE: Make sure no ember material is placed directly on the burner.
Rock Wool Placement
The included rock wool is placed on top of the burner to enhance the glow from the burner. The rock
wool works best when it is applied in a very thin, porous layer. The best method for applying the rock
wool is to brush it on to the burner. Compress a clump of rockwool between your thumb and forefinger.
Use a stiff brush to apply a thin layer of rockwool fibers onto the burner. Do not use the entire bag of
rockwool. Use only a small amount and save the remainder. Over-use of rockwool will diminish the glow
and may cause sooting or other adverse conditions.
© Travis Industries
Maintenance
8/2/2018 - 1485
864 GSR2 Op Man

Advertisement

Table of Contents
loading

Table of Contents