Advertisement
ML-2836SDIM-US
Product information
ML-2836DIM-US is an RF controller for single color lighting. Each white can achieve 256 levels of
brightness adjustment.
3
TECHNICAL INFORMATION
Colour control
DIMMING
Operation voltage
3 VDC
Operation Frequency
434MHz/868MHz
Dimensions
75x120x41mm
Remarks
1x CR2032 Battery, RF Wireless control
3 years, 2 years for battery
Receiver (purchased separately)
PART No.
ML-VLC-C5
Colour control
CCT, RGBW, RGB+CCT, DIMMING
Input voltage
12-24VDC
Output current
5x4A
Output Power
5x48-96W
Output type
12-24V constant voltage output
Operating temperature
-20°C-+50°C
Dimensions
145x46.5x16mm
Warranty
7 years
T. 1300 222 445 | www.melec.com.au
Data subject to change, please visit our website for up to date specifications: melec.com.au
For further information about our Warranties please go to: melec.com.au/legal/warranties
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Melec VALO ML-2836SDIM-US
Summary of Contents for Melec VALO ML-2836SDIM-US
- Page 1 Product information ML-2836DIM-US is an RF controller for single color lighting. Each white can achieve 256 levels of brightness adjustment. TECHNICAL INFORMATION Data subject to change, please visit our website for up to date specifications: melec.com.au Colour control DIMMING Operation voltage...
- Page 2 A: Press and hold the “Prog.” button for over 3 seconds until the connected LED lights blink, this means the pairing is deleted successfully. T. 1300 222 445 | www.melec.com.au For further information about our Warranties please go to: melec.com.au/legal/warranties...
- Page 3 Damage by corrosion will not be honoured as a material defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture, condensation and other harmful elements T. 1300 222 445 | www.melec.com.au For further information about our Warranties please go to: melec.com.au/legal/warranties Version 2...
Need help?
Do you have a question about the VALO ML-2836SDIM-US and is the answer not in the manual?
Questions and answers