Installing The Additional Wireless Lan Module - Epson PowerLite EB-810E User Manual

3. Select Network Settings and press
Note: If the Remote Password and the Web Control Password have not been set, a screen appears
prompting you to set them. Enter passwords up to 32 characters long. These passwords are used
for accessing the projector over a network, and you do not need to enter them to access the Network
Settings menu after you set them.
4. Do one of the following:
• To connect directly to a wireless device (Simple AP mode), select Passphrase, press
and enter a passphrase from 8 to 63 characters long. When you are done, return to the Network
Settings screen, select Set, and follow the on-screen instructions to save your settings and exit
the menus. Skip the rest of these steps.
• To connect to a device via a wireless network router (infrastructure mode), select the Wireless
LAN menu and press
5. Select the Security setting and press
6. Select the security settings for your network.
7. Do one of the following according to the security you selected:
• WPA3-PSK or WPA2/WPA3-PSK: Select Passphrase, press
from 8 to 63 characters long. Then continue with step 9.
• WPA3-EAP or WPA2/WPA3-EAP: Select EAP Type and press
8. Select the protocol for authentication as the EAP Type setting.
9. When you are finished, select Return and press
10. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
Parent topic:
Related tasks
Registering Digital Certificates from a Web Browser

Installing the Additional Wireless LAN Module

To use the additional wireless connections, install the optional Epson 802.11b/g/n wireless LAN module
in the projector. Do not install any other type of wireless module.
Note: With the additional wireless LAN module, a user without network access can still connect to the
projector.
Enter. Continue with the next step.
Wireless Network Projection
Enter.
Enter.
Enter to return to the Network Settings menu.
66
Enter,
Enter, and enter a passphrase
Enter.