Related references
Installation Settings - Installation Menu
Adjusting the Image Position Using Screen Position
You can adjust the image position if there are margins between the edge of the image and the projected
screen frame.
Note: You cannot adjust the screen position if the Screen Type setting is set to 16:9.
1. Turn on the projector and display an image.
2. Press the Menu button.
3. Select Installation > Screen Position and press
4. Use the arrow buttons on the remote control or projector to adjust the position of the image.
5. When you are finished, press the Menu button.
Parent topic:
Adjusting the Image Height
If you are projecting from a table or another flat surface, and the image is too high or low, you can adjust
the image height using the projector's adjustable feet.
Using Basic Projector Features
Enter.
123