Epson PowerLite EB-810E User Manual page 223

Setting
Dynamic Range
Reset to Defaults
EDID
HDMI IN EQ Level
Options
Dynamic Range
Signal Status
HDR10 Setting
HLG Setting
—
EDID (HDMI1)
EDID (HDMI2)
EDID (HDBaseT)
HDMI1
HDMI2
223
Description
Changes the range of dark and bright areas
in images; choose from Auto
(recommended), SDR, HDR10, or HLG.
Setting is only displayed in the following
cases:
• Color Mode is not set to DICOM SIM
• The current source is HDMI or HDBaseT
Displays the detected input image signal.
Changes the PQ (Perceptual Quantizer)
curve of the dynamic range using the HDR
PQ method. This setting is only displayed
when Signal Status is HDR10, or
Dynamic Range is set to HDR10.
Changes the HLG (Hybrid Log Gamma)
curve of the dynamic range using the HDR
HLG method. This setting is only displayed
when Signal Status is HLG, or Dynamic
Range is set to HLG.
Resets all settings for current input source
Describes the display capabilities of your
projector when the selected input source is
HDMI; change this setting as necessary
according to the resolution of the current
input source
Adjusts the HDMI input signal level
depending on the devices connected to the
HDMI port; change the setting if there is a
lot of interference in the image or if no
image is projected
Note: You can select the settings for
individual input sources without changing
the input source.