Table of Contents
Advertisement
Connecting the Printer's Wireless LAN Unit
When the Wireless LAN unit is connected to the printer's USB connector and there are no free USB connectors,
you can use the Wireless LAN unit and the customer display at the same time by connecting the Wireless LAN
unit to the Wireless LAN unit connector on this device.
Follow the steps below to connect the Wireless LAN unit to the device's Wireless LAN unit connector.
Remove the covers for the top and bottom of the stand as shown in the illustration.
1
• You can only use the optional Wireless LAN unit supported by the TM printer.
• The following products cannot be used with the Wireless LAN unit connected to the Wireless
LAN unit connector.
TM-T88VI / TM-T88VII / TM-T70II-DT / TM-T88V-DT / TM-T70II-DT2 / TM-T88VI-DT2
Chapter 2 Setup
15
Advertisement
Table of Contents
