Handling
This chapter explains the basic handling methods for this product.
Turning the Power On/Off
The power for this product is supplied by USB bus power, which means that the power is supplied from the
connected printer or computer through the USB connector.
To turn this product on or off, turn the connected printer or computer on or off.
Changing the Angle of the Display Unit
You can change the angle of the display unit by holding the stand with your hand while moving the display unit.
The following shows the range of motion.
Adjusting the Contrast
You can adjust the contrast of the LCD screen by sliding the contrast adjustment control on the side of the
stand.
The display may not turn off while the power is still supplied to USB connector, even if the printer's
Power LED is off.
Do not exceed the range of motion when moving the display unit. Applying excess force when
moving the display unit may cause damage.
35°
Chapter 3 Handling
20