Table of Contents
Advertisement
PQQX14033ZA.book 26 ページ ２００４年６月２１日 月曜日 午後４時１４分
Preparing the Answering System
Number of Rings
You can select the number of times the unit rings before the Answering System
answers a call, from "2" to "7" or "Toll saver"*. The factory preset is "4".
Press [MENU].
1
Scroll to "Initial setting" by pressing [d]
2
or [B], then press Select.
Press Select at "Set answering".
3
Press Select at "Number of rings".
4
5
Select the number of rings by pressing [d] or
[B].
• You can also select the number of rings by
pressing [0] (Toll saver*), or [2] to [7].
Press Save, then press [OFF].
6
*Toll saver
When you call the unit from a remote operation, the number of rings will tell you
if there are any new messages. If the unit answers on the 2nd ring, there is at
least one new message. If the unit answers on the 4th ring, there are no new
messages. To save the toll charges for the call, hang up immediately when you
hear the 3rd ring. The 3rd ring indicates that there are no new messages.
Recording Mode
Two recording modes are available. The factory preset is "Standard recording
(16 min)", which provides more recording time (16 min) and standard sound quality.
"Enhanced recording (8 min)" provides less recording time (8 min) but clearer
sound quality.
Press [MENU].
1
Scroll to "Initial setting" by pressing [d]
2
or [B], then press Select.
26
Handset
Handset
Initial setting
Back
Select
L
K
dB
Set answering
Back
Select
K
L
dB
Number of rings
Back
Select
K
L
dB
Number of rings
:4
Back
Save
K
L
dB
Initial setting
Back
Select
K
L
dB
Advertisement
Table of Contents
