Entering Characters - Panasonic KX-NCP500 Pt Programming Manual

6.
If a system password is forgotten, it can be found by loading a backup of the system data into a PC,
and checking the password using the Maintenance Console software. If you do not have a backup of
the system data, you must reset the PBX to its factory defaults and reprogram it. Therefore, we strongly
recommend maintaining a backup of the system data. For more information on how to back up the
system data, refer to the on-line help of the Maintenance Console. However, as system passwords
can be extracted from backup copies of the system data file, do not allow unauthorized access to these
files.

1.1.3 Entering Characters

The following characters can be used when storing a name, message, or other text entry data using a PT. The
tables below show you the characters available by pushing each button a specific number of times.
Table 1 (Standard mode)
Document Version 2012-10
1.1.3 Entering Characters
PT Programming Manual 11