Table of Contents
Advertisement
Operating the appliance
en
Pour the detergent and care products
into the appropriate compartments:
Measuring aid A* For liquid detergent
Compartment II
Compartment i Fabric softener,
Compartment I
*depending on the model
Pull out the detergent drawer as far
1.
as possible.
Add detergent and/or care products.
2.
Close the detergent drawer.
3.
Measuring aid* for liquid detergent
*depending on the model
Position the measuring aid for
measuring the correct amount of liquid
detergent:
Pull out the detergent drawer. Press
1.
down the insert and fully remove the
drawer.
Slide the measuring aid forwards,
2.
fold it down and click it into place.
Reinsert the drawer.
3.
18
Detergent for the
main wash, water
softener, bleach,
stain remover
starch
Do not exceed the
max.
Detergent for
prewash
Do not use the measuring aid for
Note:
gel detergents and washing powder, or
for programmes with prewash or when
"Finished in" time is selected.
For models without a measuring aid,
pour the liquid detergent into the
appropriate dispenser and place it in
the drum.
Starting the programme
Press the A button. The indicator lamp
lights up and the program starts.
The display panel shows the Ready in
time while the program is running or the
program duration and the program
progress symbols once the wash cycle
has started.
Note:
Foam detection
If the Å symbol also lights up in the
display panel, the washing machine has
detected too much foam during the
wash cycle and automatically activated
additional rinse cycles to remove the
foam.
Add less detergent to the next wash
cycle with the same load.
If you want to lock the program to
prevent it from being inadvertently
adjusted, you can select the childproof
lock as follows.
Advertisement
Table of Contents
