Table of Contents
Advertisement
Operating the appliance
en
Cancel the programme
For programs at high temperature:
Press the A button.
1.
To cool down laundry: Select
2.
à Rinse/Freshen up//Rinse.
Press the A button.
3.
For programs at low temperature:
Press the A button.
1.
Select 0 Spin/Drain [.
2.
Press the A button.
3.
Programme end during rinse
hold
- - - - 0 appears in the display panel and
the indicator lamp of the A button
flashes.
Continue the program by:
Pressing the A button (the laundry
■
will be drained with the default spin
speed setting*) or
Selecting a spin speed or set the
■
program selector to 0 Spin/Drain [
and then pressing the A button.
* depending on the chosen program ->
Overview of programmes
Programme end
End appears in the display panel and
the indicator lamp of the A button is
off.
20
Removing laundry/switching
off the appliance
Open the washing machine door
1.
and remove the laundry.
Turn the programme selector to Off.
2.
Appliance is switched off.
Turn off the tap.
3.
Not required for Aqua-Stop models.
Contents of package
Notes
– Do not leave any items of laundry
in the drum. They may shrink in
the next wash or discolour
another item.
– Remove any foreign objects from
the drum and the rubber seal –
risk of rusting.
– Leave the washing machine door
and detergent drawer open so
that any residual water can dry
away.
– Always remove the washing.
– Always wait until the programme
ends, as the appliance could still
be locked. Switch the appliance
on and wait for the unlocking
device.
– If at the end of the programme
the display has gone out, the
energy saving mode is active. To
activate, select any button.
Advertisement
Table of Contents
