Related Manuals for Trac Vac 662-IC
Summary of Contents for Trac Vac 662-IC
- Page 1 Model 662-IC/PRO/H/R Operating and Assembly Manual Midwest Equipment Manufacturing, Inc. 5225 Serum Plant Road Thorntown, IN 46071 6-29-2016...
-
Page 2: Safety Rules
SAFETY RULES Remember, any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times when using power equipment. This symbol means Attention!!!!! It is used to point out safety precautions. ▪... - Page 4 Model 662 Assembly Instructions 1.) If the mower deck is raised and lowered by a connection to the 3-point draw arms, a lift kit must be installed before mounting a vacuum attachment on the 3-point draw arms. Upper Arms (Lift Arms) 1a.) Remove the 3-pt.
- Page 7 MAINTENANCE MAINTENANCE SCHEDULE Service Dates DANGER: The Trac-Vac was built to be operated according to the rules for safe operation in this manual. Carelessness or error on the part of the operator can result in serious injury. This unit is Check engine oil level capable of amputating fingers or hands and throwing objects.
-
Page 8: Engine Maintenance
BEFORE EACH USE CHECK FOR LOOSE HARDWARE ▪ Make a thorough visual check of the unit for any bolts and nuts which may have become loose. Retighten any loose nuts and bolts CHECK TIRE PRESSURE ▪ Check tire pressure regularly. The recommended tire pressure is printed on the tire. CHECK ENGINE OIL LEVEL ▪... -
Page 9: Troubleshooting
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Engine fails to start 1. Spark plug wire disconnected 1. Connect wire to spark plug 2. Fuel tank empty 2. Fill tank with clean fuel 3. Faulty spark plug 3. Clean, adjust gap or replace Loss of power or erratic operation 1. -
Page 10: Operating Procedure
Clean tires and check pressure. Raising and supporting unit with weight off tires is recommended. When storing a unit with Rubbermaid containers, leave containers latched to top. TRAC VAC WARRANTY POLICY Midwest Equipment Manufacturing, Inc. will repair or replace, free of charge, any part, or parts that are defective in material or workmanship or both for a period of one year residential use, and 90 day’s for commercial and rental use.
Need help?
Do you have a question about the 662-IC and is the answer not in the manual?
Questions and answers