Page 1
ASSEMBLY INSTRUCTION LOIRE BAR STOOL ITEM CODE 71674 Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart Furniture, Customer Service Free call 1800 351 084 Imported by Amart Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please phone Amart Furniture, Customer Service Free call 1800 351 084 71674...
Page 2
PRE-ASSEMBLY PREPARATION Before you start: Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product Take care when lifting. Product should be assembled as near as possible to the point of use Ensure that you have all required contents for complete assembly Always read the assembly instructions carefully before beginning assembly.
Page 3
A Seat*1pc Stool Leg*2pcs Connector bar*2pcs Allen Key M6*1pc Bolt M6*25*4pcs Bolt M8*18*2pcs G Bolt M6*30*4pcs H Spacer*4pcs 71674...
Page 4
Join Stool Legs (B1) and (B2) With Bolts (F) and By using Allen Key (D) Screw to 80% Join Connector bars (C) with Bolts(E) By using Allen Key (D) Screw to 100%, Tighten the Step ① to 100% Attach Stool Seat (A) to constructed Base with Bolt (G) and Spacer (H) Using Allen Key 71674...
Page 5
ASSEMBLY IS COMPLETE Important Note – Before finally tightening the bolts, place the assembled stool upright on a level surface and sit carefully on the stool to ensure the chair legs are aligned and level. Then tighten all bolts and your stool is ready for use. 71674...
Page 6
CARE AND MAINTENANCE REGULAR CARE: ・Protect from direct sunlight ・ Vacuum regularly using low suction ・ Rotate reversible cushions regularly ・ Avoid exposure to new clothing, cushions or throws as this may lead to dye transfer and permanent staining CLEANING: ・...
Need help?
Do you have a question about the LOIRE 71674 and is the answer not in the manual?
Questions and answers