Subscribe to Our Youtube Channel
Related Manuals for JWA LUGO 68438
Summary of Contents for JWA LUGO 68438
- Page 1 ASSEMBLY INSTRUCTION LUGO DESK ITEM CODE 68438 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
-
Page 2: Before You Start
PRE-ASSEMBLY PREPARATION Before you start: 1.Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2.Take care when lifting. Product should be assembled as near as possible to the point of 3.Ensure that you have all required contents for complete assembly 4.Always read the assembly instructions carefully before beginning assembly. -
Page 3: Parts List
PARTS LIST Left metal frame Layer panel support pipe Panel Middle metal frame Layer panel 1 Right metal frame Layer panel 2 Panel support pipe Back connection panel... - Page 4 STEP 1: Load fitting D into metal frame P1. STEP 2: Fix the metal pipe P5 at the bottom of panel 2 and panel 3 with fitting B.
- Page 5 STEP 3: Fix the assembled panel 2 and panel 3 on the metal frame of P2 and P3 with fitting A. STEP4: 1) Connect the metal pipe P4 to the metal frame P1 and metal frame P2 with part A; 2) Fix panel 4 on metal frame P1 and metal frame P2 with fitting C.
- Page 6 STEP 5: Fix panel 2 on the metal frame of P1, P2, P3 and P4 with fitting B. STEP 6: Install an anti-fall device behind the bottom of the desktop.
- Page 7 ASSEMBLY IS COMPLETE...
- Page 8 SAFETY BRACKETS INSTRUCTIONS 1. Attach one Mounting Plate to the wall with the Large Screws. Make sure to attach the Mounting Plate into a stud. If mounting into brick or masonry you will need to acquire wall anchors. 2. Attach the second Mounting Plate to the furniture frame with the Short Screws.
- Page 9 To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the LUGO 68438 and is the answer not in the manual?
Questions and answers