Related Manuals for JWA Leeds 68157
Summary of Contents for JWA Leeds 68157
- Page 1 ASSEMBLY INSTRUCTION LEEDS Dining Table ITEM CODE:68157 Imported by JWA Furniture Pty Ltd, Qld, Brisbane Australia. For any assistance with assembly or for missing parts please refer to your receipt...
- Page 2 PRE-ASSEMBLY PREPARATION Before you start: 1. Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product 2. Take care when lifting. Product should be assembled as near as possible to the point of use 3. Ensure that you have all required contents for complete assembly 4.
- Page 3 PARTS LIST ① ② LEGS ② ①...
- Page 4 STEP 1: • Insert bolt B into Washer A. Use Allen Key C to connect a leg ② with the table top ①. Tighten only until the bolt is a little firm in the thread, do not fasten completely. ② ①...
- Page 5 STEP 2: • repeat step 1 to connect the other three Legs ② with the top ①. ② ② ② ② ① STEP 3: • Stand the chair the right way up on a level surface. Push down on the chair until it levels out. Do not lean beyond your own balance.
- Page 6 ASSEMBLY IS COMPLETE...
- Page 7 PRODUCT CARE: To protect your furniture, we suggest the following: • Avoid placing your furniture in direct sunlight. • Do not place furniture directly under windows. • Do not place sharp materials (knife, fork, etc.) directly onto your furniture as sharp material may scrape and damage the finish.
Need help?
Do you have a question about the Leeds 68157 and is the answer not in the manual?
Questions and answers