Advertisement
Service manual
FAILURE CODES AND WHAT TO DO IN CASE OF FAILURE
ERROR CODE
ERROR DESCRIPTION
Inadequate water supply
F5
Error of continuous water input
F3
The waste water in the machine cannot be
F2
discharged.
Heater error
F8
Alarm is active against water overflow
F1
Faulty electronic card
FE
Overheating error (temperature in the machine is
too high)
F7
Divisor position error
F9
Faulty heater sensor
F6
All manuals and user guides at all-guides.com
CONTROL
•
Make sure the water input tap is totally open and that there is no water cut.
Close the water input tap, separate the water input hose from the tap and clean the filter at
•
the connection end of the hose.
•
Restart your machine, contact the service if the error resumes.
•
Close the tap.
Contact the service.
•
Water discharge hose is clogged.
•
•
The filters of your machine might be clogged.
•
Power off-on your machine and activate the program cancellation command.
•
If the error continues, contact the service.
Contact the service.
Power off your machine and close the tap.
•
Contact the service.
•
Contact the service.
Contact the service.
Contact the service.
Contact the service.
66
T13
Advertisement
