Tracking Force Setting; Anti-Skating Setting - Pro-Ject Audio Systems A2 Instructions For Use Manual

Hide thumbs Also See for A2:

Table of Contents

Stopping playback:

Push the START/STOP lever (11) to STOP to stop playing the record at any time during playback. The

tonearm will move back into its resting position automatically. Move the lift lever (10) back to the

to ensure the tonearm rests in its lifted position.

Playback can also be stopped manually at any time without affecting the function of the automatics system.

Move the lift lever (10) to the

manually to the tone arm holder.

4. Tracking force setting

Make sure the stylus protection cover is removed. Make sure the lift lever (10) is in the

tonearm out of its rest, place it somewhere between the platter and the rest and balance the tonearm by

turning the counterweight on the rod left and right until the tonearm is level.

The Ortofon 2M Red requires 1.7g tracking force => set the wheel to the mark between 1.5 and 2

The Sumiko Rainier (shipped on the USA version) requires 2g tracking force => set the wheel to 2

position to stop playback at the desired point and then return the tone arm

Once it is level, put it back in its rest. Turn the tracking force

adjustment wheel (3) to set the desired tracking force.

Set the anti-skating by turning the anti-skating adjustment ring (4)

to the desired level. Anti-skating is generally set to the same level

as your tracking force.

The Ortofon 2M Red requires 1.7g tracking force =>

set anti-skating to 1.7

The Sumiko Rainier (shipped on the USA version)

requires 2g tracking force => set anti-skating to 2

position

position, take the

Table of Contents

Do you have a question about the A2 and is the answer not in the manual?