Clutch - Honda CB Unicorn 160 Owner's Manual

CLUTCH

Clutch adjustment may be required if the
vehicle stalls when shifting into gear or
tends to creep; or if the clutch slips, causing
acceleration to lag behind engine speed.
Normal clutch lever free play is:
10 -20 mm (0.4 -0.8 in)
10-20 mm
( )
(1) Clutch lever
(1)
1. Loosen the lock nut (2) at the lower end
of the cable. Turn the adjusting nut (3)
to obtain the specified free play. Tighten
the lock nut and check the adjustment.
2. Start the engine, pull in the clutch lever
and shift into gear. Make sure the
engine does not stall and the vehicle
does not creep. Gradually release the
clutch lever and open the throttle. The
vehicle should
smoothly and accelerate gradually.
begin to move
23