Honda CB Unicorn 160 Owner's Manual page 84

Position Light Bulb
1. Remove the front cowl (1) by removing
the screws (2) and Pan Screws (3).
2. Disconnect the head light connector.
3. Pull out the position light bulb (4) out of
the head light unit and remove the bulb
from its holder.
4. Install a new bulb in reverse order of
removal
(1)
(4)
(2)
(1) Front cowl
(2) Screws
(3) Pan Screw
(4) Position Light Bulb
78
Headlight Bulb
1. Remove the front cowl (Page 78).
2. Disconnect the connector.
3. Remove the dust cover (1).
4. Remove the headlight bulb (2) while
pressing the pin (3).
5. Install a new bulb in the reverse order
of removal.
(3) • Install the seat rubber with its
(1) Seat rubber
(2) Headlight bulb
(3) Pin
(4) ''Arrow'' mark
''Arrow'' mark (4) facing up.
(2)
(3)
(4)
(1)