Table of Contents
Advertisement
Specifications
Dimensions width B x height H
■
from 300x300 mm up to 700 x 1100 mm by 5 mm - hand-operated design
■
from 350x385 mm up to 700 x 1100 mm by 5 mm - rearming motor design
■
Total depth of 90 mm (built-in depth 80 mm) without grille
■
■
Grilles of 77% to 95% effective cross section available
Opening and securing within 5 seconds; closing in less than 30 seconds
■
Activation signal – pulse of length of 1 s min 24 V DC, or 48 V DC
■
Universal 24/48 V rearming motor (optional)
■
Degree of protection IP42 (electric part)
■
In acc. with Regulation (EU) 305/2011 (CPR), EU Directive (EU) 2014/30/EU (EMC), Directive (EU) 2011/65/EU (RoHS)
■
CE certification according to EN 12101-8
■
Tested according to EN 1366-10
■
Classified according to 13501-4 + A1
■
Fire resistance cf. tab. bellow
■
Pressure class 3 (underpressure 1500 Pa / overpressure 500 Pa)
■
Closed blade tightness class 3 according to EN 1751
■
Certificate of Constancy of Performance No. 1391-CPR-2023/0030
■
Declaration of Performance No. PM/SEDM-D/01/23/1
■
EU Declaration of Conformity No. PM/SEDM-D/03/23/2
■
Efectis France Test report on fitness for use of mechanisms No. EFR-22-0000822
■
In accordance with NF 61.937-1 and NF 61.937-10
■
Vertical duct (shaft) contruction
Concrete or aerated concrete of thickness min. 70 mm, with or without
installation frame
Selected light smoke extraction duct panels of given thickness*, with or
without installation frame
*
→ see page 19
for the variety of shaft panel materials and
thicknesses and installation details with corresponding
damper fire resistance class.
Page 4
Classification of Dampers
** The classification applies only to the damper equipped
with a grille.
Smoke extraction damper - SEDM-D
Classification**
EI 120 (v
i↔o) S1500C300AAmulti
ed
EI 120 (v
i↔o) S1500C300AAmulti, or
ed
EI 90 (v
i↔o) S1500C300AAmulti, or
ed
EI 60 (v
i↔o) S1500C300AAmulti, depending
ed
on panel material and thickness*.
TPM 155/22
Version 2023-06-07
Advertisement
Table of Contents
