Advertisement
1
Cam Post
18 Pcs
7
Screw M6*15mm
7 Pcs
A
Top Panel
1 Pc
1
Line up Cam Post
IMPORTANT NOTE:
Place all wooden parts on a clean and smooth surface such as a rug or carpet to avoid the parts from being scratched
Check that you have all parts and hardware.
Remove all wrapping materials, including staples & packing straps before you start assemble.
Do not tighten all screws or bolts untill all completely assembled.
Keep all hardware parts out of reach of children.
Last Updated: 11/2022
Reception Countertop, Modesty
2
3
Cam Lock
Wood dowel
6 Pcs
8
9
L bracket
Allen Wrench
190*20*20mm
6 Pcs
B
C
Side panel
Modesty Panel
1 Pc
CAM INSTRUCTIONS
2
Insert the Cam lock with the
arrow pointing toward the hole
turn clockwise
in the edge
EVRC1ALGG EVRC1BCLL
Panel and Metal Base
4
5
Cam Sticker
18 Pcs
18 Pcs
11
10
Screw M5*8mm
Stand-off Ø20*60
1 Pc
2 Pcs
D
Metal Leg
1 Pc
1 Pc
3
ASSEMBLY INSTRUCTIONS
MODEL NO. EVRC1ALGG/EVRC1BCLL
6
Screw
Glass Bracket
M4*16mm
30*30*16mm
38 Pcs
2 Pcs
5 Pcs
EVRC1BCL
Packed in separate box
Insert the Cam Post into
Cam Lock.Turn Cam Lock
OFFICESOURCE.COM
P.1
Advertisement
Table of Contents
Related Manuals for OfficeSource EVRC1ALGG
Summary of Contents for OfficeSource EVRC1ALGG
- Page 1 ASSEMBLY INSTRUCTIONS MODEL NO. EVRC1ALGG/EVRC1BCLL EVRC1ALGG EVRC1BCLL Reception Countertop, Modesty Panel and Metal Base Screw Glass Bracket Cam Post Cam Lock Cam Sticker Wood dowel M4*16mm 30*30*16mm 18 Pcs 18 Pcs 6 Pcs 18 Pcs 38 Pcs 2 Pcs L bracket...
- Page 2 ASSEMBLY INSTRUCTIONS MODEL NO. EVRC1ALGG/EVRC1BCLL EVRC1ALGG EVRC1BCLL Reception Countertop, Modesty Panel and Metal Base Insert the Cam Post (1) to the Side Panel (B), Turn the Cam Lock (3) under the top. then attach the sticker to cover the cams.
- Page 3 ASSEMBLY INSTRUCTIONS MODEL NO. EVRC1ALGG/EVRC1BCLL EVRC1ALGG EVRC1BCLL Reception Countertop, Modesty Panel and Metal Base Use the Screw (7) to attach the Top (A) and the Metal Leg (D). Use the Cam Post (1) and the Cam Lock (3) to attach the Top (A) and the Pedestal, Then use the Cam Sticker (4) to cover the cams.
- Page 4 ASSEMBLY INSTRUCTIONS MODEL NO. EVRC1ALGG/EVRC1BCLL EVRC1ALGG EVRC1BCLL Reception Countertop, Modesty Panel and Metal Base Use the Cam Post (1) and the Wood Dowel (2) to connect the Top Panel and the Pedestal side. Insert the Cam Post (1) to the Top Spacer (2), Install the Top Spacer (11) to the Glass Top;...
- Page 5 ASSEMBLY INSTRUCTIONS MODEL NO. EVRC1ALGG/EVRC1BCLL EVRC1ALGG EVRC1BCLL Reception Countertop, Modesty Panel and Metal Base Use Screw (5) and the L bracket (8) to connect the Top (A) and The Modesty panel (C) . Put the Glass Counter on the Modesty panel (C), Use the Cam Post (1) and Cam Lock (3) to connect.
Need help?
Do you have a question about the EVRC1ALGG and is the answer not in the manual?
Questions and answers