Moving The Electronics Box (Optional); Setting Up The Indoor Unit - Vaillant uniTOWER plus Operating Instructions Manual

2x1
A
B
1,5 x 5,5
D
4. Fit the control panel cover and use the four screws to
secure it in place.
5. Attach the control panel's front flap and check that the
front flap can move easily when it is opened from either
side.
4.11.2 Installing the side casing
2×1
C
▶
Install the side casing as shown in the figure.
0020291525_04 Installation and maintenance instructions
4.12
2x1
C
1,5 x 5,5
1.
2.
4.13
1.
A
2.
B

Moving the electronics box (optional)

1
Push the electronics box (1) upwards and pull it to-
wards you.
Move the electronics box into the required position.

Setting up the indoor unit

When setting up the product, take its weight, including
the water content, into account.
4 mm
0-10
30 mm
Orientate the product horizontally by adjusting the ad-
justable feet.
27