Advertisement
Light status
Wi-Fi Home Hotspot
Light
Colour
Status
Power
Green
On
Flashing
-
Off
Port 1 & 2
Green
On
Green
Flashing
-
Off
Data
Green/
On
Orange/
Red
-
Off
Wireless
Green
On
-
Off
Red/
Flashing
Green
Red
On
Link & Reset Buttons
What do you want to do?
Prepare to join a new network
Join a new network
Reset to factory settings
TIP: you may find it helpful to use a watch or a clock when using the Link button.
Reset to factory settings
If your hotspot stops working or becomes unpaired, you can reset it to
the factory settings.
Make sure the hotspot is plugged in and the power socket's switched on.
1
Press the Reset button for 1 second. Give it a couple of minutes.
2
If everything's okay, the Power indicator will light up.
What's happening
Hotspot running normally
Hotspot resetting or synchronising
Hotspot turned off
Device connected to hotspot
Data being sent or received
No device connected to hotspot or device switched off
Hotspot connected to network
Green: High transfer speed
Orange: Medium transfer speed
Red: Low transfer speed
Hotspot not connected to network
Wireless enabled, data is being transmitted/received
Wireless disabled
WPS setup in progress (quicker flashing indicates
WPS connection error)
Red for 30 seconds: WPS connection successful.
Permanent red: wireless security turned off.
Press and hold
Link button for 5 to 8 seconds
Link button for 1 second
Reset button for 1 second
Advertisement
