Advertisement
To connect dongle to another wireless network manually
Note: If your device already has built-in wireless, you may want to switch it off to
make sure you're connecting with your new dongle.
Click
in your system tray (lower-right corner of your screen) to view available
1
wireless connections. For the dongle connection, you might need to scroll down.
It'll be called something like WiFi 2 or Wireless Network Connection 2.
2
Select your wireless network in the list and click Connect to continue.
Enter your network wireless key and click Connect to complete the connection.
3
Your new wi-fi base station and your existing wireless broadband router will show up
as two separate networks. If your device shows both networks, it's worth giving both
wi-fi networks a go as one might be faster and more reliable than the other.
Light status
Dual-band dongle
Light
Status
What's happening
Power
Off
No power
On
Dongle running normally
Wireless
On
Connected
Flashing
Data being sent or received or WPS in progress
Off
Not connected
Base station
Light
Status
What's happening
Power
On/Off
Base station powered on or off
Router
On
Base station connected to router port
Off
No connection to router or router switched off
Ethernet
On
Device connected to ethernet port
Flashing
Data being sent or received
Off
No connection to device or device switched off
Wireless
On
Wireless enabled
Flashing
Data being sent or received
WPS
On
Connection successful (light goes off after 30 seconds)
(in button)
Flashing
Connection in progress. Rapid flashing indicates an error, try again
Off
No WPS connection in progress
Advertisement
