Advertisement
1
Plug in
TIP: you might find it easier to plug your new hotspot in the same double power
socket or near one of your existing extenders whilst you set things up.
Plug the hotspot directly into a wall power socket near the device you want
1
to connect. Make sure the power socket and extender are switched on.
2
Check the hotspot On/Off button on the top is switched on.
IMPORTANT: to work properly the hotspot must be plugged directly into the wall
socket and not into extension leads.
1
2
Add to your
existing network
Press the Link button on the front for 5 to 8 seconds.
1
Wait for the device to restart. Give it a couple of minutes. If everything's okay
2
the Power indicator will go back to steady green.
Press the Link button again, this time for 1 second.
3
Within 2 minutes, press the Link or equivalent button on any of the existing
4
extenders for 1 second to complete the connection to the network.
Wait for connection to complete. Give it a couple of minutes. If everything's okay,
5
the Power and Data indicators on your new hotspot will light up.
See Connection help overleaf if the Data indicator doesn't light up on the hotspot.
2
On
Off
Advertisement
