Connecting With Nonlinear Pc Software - Roland VC-200HD Owner's Manual

Connecting with Nonlinear PC Software

The status of support for PC non-linear editing software is as follows.
PC Non-linear Editing Software
Apple Final Cut Pro
Adobe Pemiere Pro 2.0
Sony Vegas 7.0
Avid Express Pro 5.2
Canopus EDIUS 4.0 pro
*1 When capturing HDV output from a VC-300HD/VC200HD with Apple Final Cut Pro 5.0, before starting capture, please click on
"Play" on the "Cut and Capture" screen to place the VC-300HD/VC200HD in "Play" state.
*2 When capturing DV, select either "480/59.94i" (for NTSC DV) or "576/50i" (for PAL DV) with the VC-300HD/VC200HD
"110:i.LINK IN" menu to put the VC-300HD/VC-200HD in a state whereby it is ready to accept DV signals.
* This list does not guarantee any operations.
* The above table corresponds to VC-300HD/VC-200HD Version 1.02. The most recent support information can be found on our
website (http://www.rolandsystemsgroup.net/).
Roland Website: http://www.rolandsystemsgroup.net/
HDV Capture HDV Output
yes *1 yes
yes yes
yes yes
yes yes
yes yes
Main Specifications
DV Capture DV Output
yes yes *2
yes yes *2
yes yes *2
yes yes *2
yes yes *2
51