JVC KD-S5050 Instructions Manual
Hide thumbs Also See for KD-S5050:


For installation and connections, refer to the separate manual.
Para la instalación y las conexiones, refiérase al manual separado.
Pour l'installation et les raccordements, se référer au manuel séparé.
For customer Use:
Enter below the Model No. and
Serial No. which are located on
the top or bottom of the cabinet.
Retain this information for future
Model No.
Serial No.


Table of Contents

Subscribe to Our Youtube Channel

Summary of Contents for JVC KD-S5050

  • Page 1 CD RECEIVER RECEPTOR CON CD RECEPTEUR CD KD-S5050 DIRECT TRACK ACCESS For installation and connections, refer to the separate manual. Para la instalación y las conexiones, refiérase al manual separado. Pour l’installation et les raccordements, se référer au manuel séparé.
  • Page 2: How To Reset Your Unit

    INFORMATION (For U.S.A.) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 3: Table Of Contents

    Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. SOUND ADJUSTMENTS ....12 How to reset your unit ........2 How to use the MODE button ......
  • Page 4: Location Of The Buttons

    LOCATION OF THE BUTTONS Control panel s df Display window 12 34 DIRECT TRACK ACCESS MODE Display window (Standby/On Attenuator) button 2 +/– button o SCM (Sound Control Memory) indicator 3 LOUD (Loudness) button ; CD indicator 4 SEL (Select) button a Band indicators 5 Loading slot FM1, FM2, FM3...
  • Page 5: Basic Operations

    BASIC OPERATIONS MODE Turning on the power Adjust the sound as you want (see pages 12 – 14). Turn on the power. To drop the volume in a moment Press briefly while listening to any source. “ATT” starts flashing on the display, and Note on One-Touch Operation: the volume level will drop in a moment.
  • Page 6: Radio Operations

    RADIO OPERATIONS MODE Listening to the radio To stop searching before a station is received, press the same button you have pressed for searching. You can use either automatic searching or manual searching to tune in to a particular station. Searching a station manually: Manual search Searching a station automatically:...
  • Page 7: Storing Stations In Memory

    Storing stations in memory Tune in to a station you want while “M” (manual) is flashing. You can use one of the following two methods to store broadcasting stations in memory. Press to search • Automatic preset of FM stations: SSM (Strong- stations of higher station Sequential Memory) frequencies.
  • Page 8: Tuning In To A Preset Station

    Manual preset Notes: • A previously preset station is erased when a new station You can preset up to 6 stations in each band (FM1, is stored in the same preset number. FM2, FM3 and AM) manually. • Preset stations are erased when the power supply to the memory circuit is interrupted (for example, Ex: Storing an FM station of 92.5 MHz into the during battery replacement).
  • Page 9: Cd Operations

    CD OPERATIONS MODE Playing a CD Note: When a CD is inserted upside down, the CD automa- Insert a disc into the loading slot. tically ejects. The unit turns on, draws a CD and starts playback To stop play and eject the CD automatically.
  • Page 10: Locating A Track Or A Particular Portion On A Cd

    Locating a track or a particular Selecting CD playback modes portion on a CD To play back tracks at random (Random Play) To fast-forward or reverse the track You can play back all tracks on the CD at random. Press MODE to enter the functions mode Press and hold while playing a CD.
  • Page 11: Prohibiting Cd Ejection

    Prohibiting CD ejection You can prohibit the CD ejection and can lock a CD in the loading slot. While pressing CD, press and hold more than 2 seconds. “EJECT” flashes on the display for about 5 seconds, and the CD is locked and cannot be ejected.
  • Page 12: Sound Adjustments

    SOUND ADJUSTMENTS Adjusting the sound Adjust the level You can adjust the sound characteristics to your To increase the level. preference. Select the item you want to adjust. To decrease the level. Each time you press the button, the adjustable items change as follows: “...
  • Page 13: Using The Sound Control Memory (Scm)

    Using the Sound Control Recalling the sound modes Memory (SCM) When “SCM LINK” is set to “LINK ON,” select the source. You can select and store a preset sound adjustment suitable to each playback source. (Advanced SCM) Selecting and storing the sound modes Once you select a sound mode, it is stored in memory.
  • Page 14: Storing Your Own Sound Adjustments

    Storing your own sound To turn on/off the loudness function. adjustments See page 12 for details. You can adjust the sound modes (BEAT, SOFT, POP: see page 13) to your preference and store your own adjustments in memory. • There is a time limit in doing the following Press and hold SCM until the sound procedure.
  • Page 15: Other Main Functions

    OTHER MAIN FUNCTIONS Cancelling Advanced SCM Setting the clock – SCM LINK Press and hold SEL (Select) for more than 2 seconds. You can cancel the Advanced SCM (Sound Control “CLOCK H”, “CLOCK M”, “SCM LINK” or Memory), and unlink the sound modes and the “LEVEL”...
  • Page 16: Selecting The Level Display

    Selecting the level display Select the desired mode — “VOL 1”, “VOL 2” or “OFF”. You can select the level display according to your preference. When shipped from the factory, “VOL 2” is selected. VOL 1 : Shows the volume level indicator. VOL 2 : Alternates “VOL 1”...
  • Page 17: Detaching The Control Panel

    Detaching the control panel Attaching the control panel Insert the left side of the control panel You can detach the control panel when leaving into the groove on the panel holder. the car. When detaching or attaching the control panel, be careful not to damage the connectors on the back of the control panel and on the panel holder.
  • Page 18: Maintenance

    MAINTENANCE Handling discs When playing a CD-R Before playing back CD-Rs, read their instructions or cautions carefully. This unit has been designed to reproduce CDs • Use only “finalized” CD-Rs. and CD-Rs (Recordable). • Some CD-Rs may not play back on this unit •...
  • Page 19: Troubleshooting

    TROUBLESHOOTING What appears to be trouble is not always serious. Check the following points before calling a service center. Symptoms Causes Remedies • Sound cannot be heard The volume level is set to the Adjust it to the optimum level. from the speakers.
  • Page 20: Specifications

    SPECIFICATIONS AUDIO AMPLIFIER SECTION CD PLAYER SECTION Maximum Power Output: Type: Compact disc player Front: 45 watts per channel Signal Detection System: Non-contact optical Rear: 45 watts per channel pickup (semiconductor laser) Continuous Power Output (RMS): Number of channels: 2 channels (stereo) Front: 17 watts per channel into 4 Ω, Frequency Response: 5 Hz to 20 000 Hz 40 Hz to 20 000 Hz at no more than...
  • Page 21 Having TROUBLE with operation? Please reset your unit Refer to page of How to Reset Still having trouble?? USA ONLY Call 1-800-252-5722 http://www.jvc.com We can help you! VICTOR COMPANY OF JAPAN, LIMITED 0803KKSFLEJEIN EN, SP, FR © 2003 VICTOR COMPANY OF JAPAN, LIMITED...
  • Page 25: Localizacion De Averias

    If you have any questions or require information regarding a su automóvil. Si tiene alguna pregunta o necesita información installation kits, consult your JVC car audio dealer or a company acerca de las herramientas para instalación, consulte con su besoin d’information sur des kits d’installation, consulter votre...
  • Page 26 • When using the optional stay • When installing the unit without using the sleeve • Cuando emplea un soporte opcional • Instalación de la unidad sin utilizar la cubierta • Lors de l'utilisation du hauban en option • Lors de l'installation de l’appareil sans utiliser de manchon In a Toyota for example, first remove the car radio and install the unit in its place.
  • Page 27: Electrical Connections

    JVC convertisseur de tension, que vous pouvez acheter chez un • Replace the fuse with one of the specified rating. If the fuse de equipos de audio para automóviles.
  • Page 28 Conector en Y (no suministrado con esta unidad) Fil d'alimentation à distance Haut-parleur arrière Connecteur Y (non fourni avec cet appareil) INPUT JVC amplifier Amplificador de JVC Amplificateur JVC Blue with white stripe Azul con rayas blancas Bleu avec bande blanche To automatic antenna if any Signal cord (not supplied with this unit) A la antena automática, si la hubiere...

This manual is also suitable for:


Table of Contents