Basic Operations; Turning On The Power - JVC KD-S10 Instructions Manual

1

Turning on the power

1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the
power automatically comes on. You do not have
to press this button to turn on the power.
2
Select the source.
FM
CD
AM
To operate the tuner (FM or AM),
see pages 6 – 8.
To operate the CD,
see pages 9 – 11.
3
Adjust the volume.
Volume level indicator
(see page 16)
MO
3
To increase the volume.
To decrease the volume.
Volume level appears

BASIC OPERATIONS

RPT RND
MODE SCM
4
Adjust the sound as you want (see
pages 12 – 14).
To drop the volume in a moment
Press briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
To turn off the power
Press and hold
appears on the display.
Note:
When you use this unit for the first time, set the built-
in clock correctly, see page 15.
CAUTION on volume setting
CDs produce very little noise compared with other
sources. If the volume level is adjusted for the tuner,
for example, the speakers may be damaged by the
sudden increase in the output level. Therefore, lower
the volume before playing a disc and adjust it as
required during playback.
FM
2
CD
SSM
AM
until "SEE YOU"
5