Lenovo RT5.0kVA Installation And User Manual page 24

On/Off settings
On/Off settings
(continued)
12
3U Rack or Tower UPS RT5.0kVA and RT6.0kVA Installation and User's Guide
Submenu
Cold start
Forced reboot
Auto restart
Auto start
Energy saving
Sleep mode
Remote command
Available settings
[Enabled] [Disabled]
Authorize the product to
start on battery power.
[Enabled] [Disabled]
If mains recover during a
shutdown sequence:
If set to Enabled, shutdown
sequence will complete
and wait 10 seconds prior
to restart, if set to Disabled,
shutdown sequence will
not complete and restart
will occur immediately.
[Enabled] [Disabled]
Authorize the product
to restart automatically
when mains recovers
after a complete battery
discharge.
[Enabled] [Disabled]
The UPS automatically
starts up as soon as mains
power is available (no need
to press the button).
[Disabled] [100W] ...
[1000W]
If Enabled, UPS will shut
down after 5 min. of
back-up time, if load is less
than threshold.
[Enabled] [Disabled]
If Disabled, LCD and
communication will turn
OFF immediately after UPS
is OFF.
If Enabled, LCD and
communication stays ON
1h 30 min. after UPS is
OFF.
[Enabled] [Disabled]
If Enabled, shutdown or
restart commands from
software are authorized.
Default settings
[Enabled]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]