Roland V-Drums TD-6KX Owner's Manual page 8

USING THE UNIT SAFELY
FD-8
(Hi-Hat Control Pedal)
fig.FD-8.e
Adjusting the Travel of the Pedal
Loosen the nut with a tuning key.
After adjusting, tighten the nut.
Shift the Arm
shallow
Anchor Bolt
Attaching the Anchor Bolts (When Using on
Anchor Bolt
• The tips of the anchor bolts are sharp. Handle with care.
• When using on flooring, the anchor bolts may damage
the floor. Do not attach the anchor bolts.
• When the FD-8 is not going to be used for a long period
of time, move and fix the arm, allowing longer travel for
the pedal.
• To avoid damage, do not leave the FD-8 for extended
periods of time with the pedal plate depressed.
8
deep
Pedal Plate
Control Out Jack
the Drum Mat)
Spring for
the Anchor Bolt
Using the FD-8
Using the FD-8, you can control the opening and closing of the
hi-hat sound.
Open Hi-Hat
Strike the hi-hat without pressing the pedal
Half Open Hi-Hat
Strike the hi-hat with the pedal pressed half-way
Closed Hi-Hat
Strike the hi-hat with the pedal pressed
Foot Closed
Completely press down the pedal
Foot Open
Press the pedal and then immediately release it
The volume of the Foot Closed sound can be adjusted
separately (TD-6V Owner's Manual; p. 66).
• Connect the FD-8 to the TD-6V before turning on the
power.
• Do NOT press the pedal when turning on the power.
Specifications
FD-8
Dimensions: 130 (W) x 396 (D) x 103 (H) mm
5-1/8 (W) x 15-5/8 (D) x 4-1/16 (H) inches
Weight: 1.3 kg
2 lbs 14 oz
Accessory: Tuning Key
962a
* In the interest of product improvement, the specifications and/
or appearance of this unit are subject to change without prior
notice.