Roland V-Drums TD-6KX Owner's Manual page 15

CY-8
(Crash Cymbal)
fig.CY-8.e
Attaching the Cymbal Pad to a Stand
1. Use a tuning key to tighten the stopper bolt.
The stopper keeps the cymbal pad from turning, and
prevents the cables from catching or getting tangled on
the stand.
fig.CY-Set01.e
Stopper
(Be sure to
orient it correctly)
2. Attach the CY-8 so the Roland logo is
positioned on the opposite side of the playing
area.
3. Tighten the wing nut to obtain the desired
movement.
Use the included felt washer and the wing nut.
fig.CY-Set02.e
Double sounding may occur if the wing nut is loose.
Pad Face
Bow Portion
Edge Portion
Output Jack
Tighten the bolt with
a tuning key.
Wing Nut
Felt Washer
Playing the CY-8
Bow Shot
This is the most common playing method, playing the pad
face of the cymbal. It corresponds to the sound of the "head-
side" of the connected trigger input.
fig.CY-Bow.e
Edge Shot
This playing method involves striking the edge with the
shoulder of the stick. It corresponds to the sound of the "rim-
side" of the connected trigger input.
fig.CY-Edge.e
Choking
Choking (pinching) the cymbal's edge with the hand
immediately after hitting the cymbal makes the sound stop.
fig.CY-Choke
Specifications
CY-8
Size: 12 inches
Triggers: 2 (Bow, Edge)
Dimensions: 290 (W) x 295 (D) x 47 (H) mm
11-7/16 (W) x 11-5/8 (D) x 1-7/8 (H) inches
Weight: 650 g / 1 lb 7 oz
Accessories: Wing Nut, Felt Washer, Stopper
962a
* In the interest of product improvement, the specifications and/
or appearance of this unit are subject to change without prior
notice.
* Continuous playing may cause dis-coloration of the pad, but
this will not affect the Pad's function.
USING THE UNIT SAFELY
Bow
Edge
15