Advertisement
9
Clear clogged Clean Base™
Charging Station + Automatic Dirt
Disposali series
a. Push down the canister lid to ensure it
is firmly sealed.
b. Remove any debris from the debris
evacuation port on the bottom of the
Clean Base.
c. Unplug the Clean Base® Charging
Station + Automatic Dirt Disposal from
the wall.
Maintenance Guide
d. Place the Clean Base® Charging
Station + Automatic Dirt Disposal
on its side. Loosen the 5 screws
retaining the debris evacuation
tubing on the bottom and then remove
any debris.
e. If issue persists, remove the bag
and use a can of compressed air
to clean any dust particles that may
remain inside the Clean Base®.
Excessive build-up of hair in
Roomba's brushes and bearings
can permanently damage
Roomba. Inspect brush
bearings regularly.
Do not attempt to run Roomba without the
bearings. If you misplace Roomba's brush
bearings, contact IXL Home Customer
Service for replacement bearings.
TIP: If you notice Roomba picking up less debris
from your floor, empty the bin and clean the
brushes.
5.
Advertisement
