Advertisement
7
Clean Roomba's charging contacts
a. Clean the charging contacts by wiping
the charging contacts on the home
base and Robot with a clean, dry cloth.
You can alternatively use lightly dampened
melamine foam such as a magic eraser or
a clean, Scotch bright sponge to clean the
charging contacts on the home base and
Robot.
Charging contacts on the home base
Charging contacts on the Robot
b. Clean localisation camera
(only applicable to 900 and i series) –
Wipe the window on the robot's top
surface using a microfibre or soft cotton
cloth that has been lightly dampened
with water or a screen cleaning solution.
900 series
8
a. Lift up the lid of the canister lid to open.
b. Pull up on the plastic card leading to
Charging contacts &
docking sensor on
i series Clean Base
c. Lightly shake the bag.
d. Place the bag into the canister, sliding
e. Press down on the lid making sure it is
f.
i series
Maintenance Guide
Clean base reporting a bag full
after just a couple runs i series
the vacuum port and lift up to pull the
bag out of the canister.
the plastic card into the guide rails.
firmly closed.
Make sure the vacuum path isn't clogged.
4.
Advertisement
