Controlling The Sd-80 Via Midi; Controlling The Internal Sound Generator; Switching The Sound Generator Mode - Roland Studio Canvas SD-80 Owner's Manual

Controlling the SD-80 via MIDI

The functionality of the SD-80's internal sound generator, mixer, and audio effects can be controlled by
MIDI messages received from the USB connector or MIDI IN connector. This chapter provides various
examples that show how MIDI messages can be used to operate the SD-80.
* For details on operation via MIDI, refer to "MIDI Implementation" (MIDIImp_E.pdf) on the included CD-ROM.

Controlling the internal sound generator

MIDI messages can be used to control the internal sound generator.

■ Switching the sound generator mode

You can use MIDI messages to switch the sound generator mode. Transmit one of the following
messages according to the desired sound generator mode. When you switch the sound generator
mode, the sound generator will be initialized.
Sound Generator mode
GM2 mode
Native mode
GS mode
XGlite mode
Features of Native mode
Native mode allows you to take full advantage of the SD-80's sound generator structure. Use this mode
when you want to edit the internal sounds or MFX in greater detail. Although this mode lets you control
parameters that cannot be edited in other modes, operations in Native mode are not compatible with
GM2. In other words, song data created in Native mode cannot be reproduced by playing it back
on another GM2 sound generator.
fig.5-01b
PART 1
PART 32
• In Native mode, MFX and sounds (instruments) can be handled independently. For this reason, simply
selecting an Enhanced sound will not automatically cause MFX to be applied. You will need to edit the
part parameters in order to apply MFX.
• You can also apply effects to sounds other than the Enhanced set, or input the signals from multiple
parts into a single MFX.
* For details on using MFX, refer to "Using the effects of the internal sound generator" (p. 39).
Message
GM2 System On
Native On
GS Reset
XG System On
MFX Parameter 1
MFX Parameter 2
MFX Parameter 3
Instrument Part
Parameters Parameters
Instrument Part
Parameters Parameters
F0 7E 7F 09 03 F7
F0 41 10 00 48 12 00 00 00 00 00 00 F7
F0 41 10 42 12 40 00 7F 00 41 F7
F0 43 10 4C 00 00 7E 00 F7
MFX A
MFX B
MFX OUT
MFX C
DRY OUT
Signal Flow
Parameter reference
53