Selecting The Type Of Part (Inst/Drum) - Roland Studio Canvas SD-80 Owner's Manual

Using the internal sound generator

Selecting the type of part (INST/DRUM)

Here's how to select the type (Part Mode) for each part.
* Inst Type can be executed only if the sound generator mode is GM2 mode or Native mode.
fig.5-04
1.
Press [INST].
The button will light.
2.
Press [PAGE ] until the display indicates Inst Type.
3.
Turn the [VALUE] dial to select the desired part mode
(INST or DRUM).
The part mode has now been selected.
4.
Press [INST] once again to return to the basic screen.
24
1,4
3 2