Power Button; Removing The Power Button - Dell OptiPlex 7070 Ultra Service Manual

About this task
The figure indicates the location of the system fan and provides a visual representation of the installation procedure.
Steps
1. Connect the system fan cable to the connector on the system board.
2. Align the tabs on the system fan with the guiding rails on the heat-sink bracket.
3. Place the system fan into the fan tray until it clicks into place.
Next steps
1. Install the cover.
2. Follow the procedure in

Power button

Removing the power button

Prerequisites
1. Follow the procedure in
2. Remove the cover.
3. Remove the system fan.
About this task
The figure indicates the location of the power button and provides a visual representation of the removal procedure.
24 Removing and installing components
After working on your device.
Before working inside your device.