Table of Contents
Advertisement
6.9 Changing the programme
after it is started
You can change the programme you
selected to dry your laundry with a
different program after the machine
starts running.
• For example, to select Extra Dry
instead of Iron Dry, pause the
programme by pressing the Start
/ Stand-by button for 1 second.
• Select the Extra Dry program
using the Programme Selection
button.
• Press the Start/Stand-by button
to start the programme.
• Adding and removing clothes
during stand-by
• If you want to add or remove
clothes to/from the machine after
the drying programme starts:
• Press theStart/Standby button to
put the machine in Standby state.
The drying operation stops.
• Open the loading door while in
Stand-by state, and close the
door after you remove or add
laundry.
• Press the Start/Stand-by button
to start the program.
C
Adding laundry after the
drying operation starts may
cause the dried laundry
inside the machine to mix
with wet laundry and leave
the laundry damp at the end
of operation.
C
Adding or removing laundry
during drying may be
repeated as many times as
you wish. But this operation
continuously interrupts the
drying operation, and thus
increases program duration
and energy consumption.
So, it is recommended to
add laundry before the
program starts.
C
If a new program is
selected by turning the
programme selection
knob while the machine is
in stand-by; the running
program terminates and
new program information is
displayed on the screen.
WARNING: Do not touch the
inner surface of the drum
while adding or removing
clothes during a continuing
program. The drum surface
is hot.
6.10 Cancelling the programme
If you want to cancel the programme
and terminate the drying operation
for any reason after the machine
starts running, keep the On/Off/
Cancel button pressed for 3 seconds.
A
WARNING: The inside of the
machine shall be extremely
hot when you cancel the
program during machine
operation, so run the
ventilation program to allow
it to cool down.
EN
23
Advertisement
Table of Contents
