Table of Contents
Advertisement
en Appliance door
Requirement: The appliance door must be removed.
Press on the left-hand pressure surface
1.
the hook is released.
Press on the right-hand pressure surface
2.
the hook is released.
Tilt the condensate tray forwards slightly until the
3.
lower retaining hooks are released.
Use both hands to pull the condensate tray
4.
wards and out at an angle
Installing the condensate tray
Use both hands to insert the condensate tray
1.
an angle
.
26
until
until
up-
.
at
Snap the hooks
on the left and right of the con-
2.
densate tray into the gap
Push the condensate tray until the hooks on the
3.
right, left and bottom click into place.
a The condensate tray is installed horizontally.
21.2 Attaching the appliance door
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
When the hinges are not secured, they can snap shut
with great force.
Make sure that the locking levers are always either
▶
fully closed or (when detaching the oven door) fully
open.
Slide the appliance door straight onto the two
1.
hinges . Slide the appliance door on as far as it
will go.
Open the appliance door fully.
2.
Close the locking levers on the left- and right-hand
3.
hinges .
a The locking levers are closed. The appliance door is
secured and cannot be detached.
Close the appliance door.
4.
21.3 Removing the door panes
WARNING ‒ Risk of injury!
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
Open the appliance door fully.
1.
.
Advertisement
Table of Contents
