Table of Contents
Advertisement
Clean the rail.
3.
→ "Cleaning products", Page 21
20.2 Attaching the rails
Notes
¡ The rails only fit on the right or left.
¡ For both rails, ensure that the curved rods are at the
front.
First, push the rail into the middle of the rear
1.
socket
until the rail rests against the cooking
compartment wall, and then push this back
21 Appliance door
To clean the appliance door thoroughly, you can disas-
semble the appliance door.
21.1 Detaching the appliance door
WARNING ‒ Risk of injury!
Components inside the appliance door may have sharp
edges.
Wear protective gloves.
▶
The hinges on the appliance door move when the door
is opened and closed, which could trap your fingers.
Keep your hands away from the hinges.
▶
Open the appliance door fully.
1.
Push the rail into the front socket
2.
also rests against the cooking compartment wall,
and then press this downwards
.
2.
WARNING ‒ Risk of injury!
When the hinges are not secured, they can snap
shut with great force.
Make sure that the locking levers are always
▶
either fully closed or (when detaching the oven
door) fully open.
Open the locking levers on the left- and right-hand
hinges.
Locking levers opened
Locking levers closed
a The locking levers are open. The hinges are now se-
cured and cannot snap shut.
Close the appliance door fully . Grab hold of the
3.
appliance door with both hands (on the left and
right) and pull it upwards and out .
Carefully place the appliance door on a level sur-
4.
face.
Removing the condensate tray
Notes
¡ Wipe down the condensate tray after every steam
operation or before removing it.
¡ Do not clean the condensate tray in the dishwasher
Appliance door en
until the rail
.
The hinge is now se-
cured and cannot snap
shut.
The appliance door is
secured and cannot be
detached.
25
Advertisement
Table of Contents
