Repairs; Intended Environment; Safety When Connecting; Power Supply - Medion LIFE P18047 Instruction Manual

• Make sure that there is enough clearance in the wall units! Ensure a minimum separation
of 10 cm around the device for sufficient ventilation.
• Operate all components on a stable, level and vibration-free base, to prevent the
LED-Backlight TV from falling over.
• Avoid dazzle, reflections and strong bright-dark contrast in order to protect your eyes.
• The optimal viewing distance is 3 times the screen diagonal.

2.3. Repairs

• Repairs to your LED-Backlight TV should only be carried out by qualified specialists.
• Please contact our authorised service centre if you have any problems with your
LED-Backlight TV.
• Make sure to use only replacement parts provided by the manufacturer. The device may
sustain damage if unsuitable replacement parts are used.

2.4. Intended Environment

• The device can be operated at an ambient temperature of +5° C to +35° C and a relative
humidity of 20% - 85% (non condensing).
• In the switched-off state the LED-Backlight TV can be stored from -20° C to +60° C.
• Keep the device at a distance of at least one metre from high frequencies and magnetic
sources of interference (television, loudspeaker boxes, mobile telephones etc.) to avoid
malfunctioning.
WARNING!
After transporting the LED-Backlight TV wait until the device has reached ambi-
ent temperature before switching it on.
Large changes in temperature or fluctuations in humidity can cause moisture to
build up due to condensation within the LED-Backlight TV, which can cause an
electrical short circuit.
• During thunderstorms or if the device is not going to be used for long periods, remove
the plug from the mains socket and the aerial cable from the aerial socket.

2.5. Safety when connecting

2.6. Power Supply

• Even when switched off, some components of the device are live. In order to disconnect
the power to your LED-Backlight TV or to completely isolate the device from voltage
sources remove the mains plug from the mains socket.
WARNING!
Do not open the device's housing. There is a risk of electric shock when the hous-
ing is open. The device does not contain any parts requiring maintenance.
• Only plug the LED-Backlight TV into an earthed socket with 220-240 V~ 50 Hz. Contact
you electricity provider if you are not sure if the socket is earthed or not.
• The socket must be near the LED-Backlight TV and easily accessible.
• In order to disconnect the power to your LED-Backlight TV or to completely isolate the
device from voltage sources remove the mains plug from the mains socket.
• For extra safety, we recommend using an over-voltage protection device to prevent your
LED-Backlight TV sustaining damage as a result of power surges or lightning strikes.
• If you are using an extension cable, make sure that it complies with UK Electrical Safety
requirements. If in doubt, contact your electrician.
6