Table of Contents
Advertisement
4.
Start of Operation
CAUTION!
Before starting up please make sure that you read the "Safety instructions"section
4.1. Unpacking
•
Select a suitable place for setting up the device.
•
Open the box very carefully to avoid damaging the device. The device could be damaged if you use a knife with a
long blade to open the box.
•
The box contains a number of small items (including batteries). Keep these items out of reach of children; the parts
are easy to swallow.
•
Store the packaging material in a safe place; only use this box to transport the TV.
WARNING!
Keep packaging material such as plastic film away from children. There is a risk of
suffocation if used improperly.
4.2. Installation
Attach the base stand as shown in the drawing. Carry out this step before connecting the LED-Backlight TV.
4.3. Inserting Batteries into the Remote Control
Open the battery compartment cover on the back of the remote control.
Insert two LR03 (AAA) 1.5-V batteries in the battery compartment of the remote control. Check the battery polarity
(inscribed on the bottom of the battery compartment).
Replace the cover.
CAUTION!
Remove the batteries if the device will not be used for long periods. The remote control can be
damaged by leaking batteries.
SPDIF
Coax. OUT
SCART
SPDIF
Coax. OUT
SCART
4x
4x
EN
13
Advertisement
Table of Contents
