Connecting A Dvd/Video Recorder And Sat Receiver; Connecting A Camcorder; Device With Hdmi Or Dvi Output - Medion LIFE P18047 Instruction Manual

With a component video cable (3 x cinch to 3.5 mm jack)
 If the receiver has YUV outputs (YPbPr), it is recommended that you connect it to the YPbPr connection on the LCD
TV using cinch cables and the supplied YUV adapter cable (3 x cinch (green/blue/red) to 3.5 mm jack).
PLEASE NOTE!
Use only the supplied YUV adapter.
 For sound transmission, connect the supplied AV adapter to the SIDE AV connection and connect a stereo cinch ca-
ble (red and white plugs) to the corresponding sockets on the adapter and the audio inputs on the device.
PLEASE NOTE!
Use only the supplied AV adapter.
With a SCART cable
 Use a SCART cable to connect a receiver to the SCART socket. No additional cable is required for sound transmis-
sion.
With an AV adapter
 Connect the AV adapter with the side AV connector on the LCD TV.
 Connect a stereo cinch cable (red and white plugs) between the AV adapter and the audio outputs on the external
appliance.
 Connect a video cinch cable (yellow plug) between the AV adapter and the video output on the external appliance.
PLEASE NOTE!
Use only the supplied AV adapter.

7.8. Connecting a DVD/video recorder and SAT receiver

If you want to connect a DVD recorder or video recorder and a SAT receiver at the same time, you can do so as follows:
 Connect the receiver as described above.
 Now connect the receiver using a SCART cable plugged into the SCART output on the DVD recorder and the SCART
input on the receiver.
 Connect an antenna cable between the antenna socket on the LCD TV and the antenna output on the recorder.
 Connect an additional antenna cable between the antenna input on the DVD recorder and the antenna output on
the decoder.
 Connect the SAT receiver to the LNB on the parabolic antenna.

7.9. Connecting a camcorder

 Connect the AV adapter cable with the side AV connector on the LCD TV.
 Connect a stereo cinch cable (red and white plugs) between the AV adapter and the audio outputs on the external
appliance.
 Connect a video cinch cable (yellow plug) between the AV adapter and the video output on the external appliance.
PLEASE NOTE!
Use only the supplied AV adapter.

7.10. Device with HDMI or DVI output

HDMI ("High Definition Multimedia Interface") is the only interface in the area of consumer electronics that trans-
mits audio and video data simultaneously. It handles all standard current image and sound formats, including HDTV
(high-definition TV), which means it can also display resolutions of 1080p without any loss in quality.
Many consumer electronic devices, e.g. DVD players, are now equipped with HDMI or DVI outputs.
7.10.1. Connecting an external device with an HDMI output
 Connect an HDMI cable (not supplied) to one of the HDMI inputs on the LCD TV and to the HDMI output of the ex-
ternal device.
 Switch the LCD TV on when the HDMI device is connected.
 Switch on the external HDMI playback device.
EN
21