Table of Contents
Advertisement
4.7. Channel search when switching on for the fi rst time
You will be guided through the first time installation when you switch the device on for the first time.
Using the direction buttons you can move up or
down in the menu and select the required language.
After confirming the selected language with QM the
first time installation will begin.
Use to select the desired country. The country
setting will influence the order in which the channels
are stored. Also, there are a number of options preset
for the individual countries.
If you would also like to change the default settings
for the teletext language, use the direction button
to select the entry TELETEXT SPRACHE then
use the direction buttons to select the desired
language region WEST, EAST, CYRIL-
LIC, TURK/GRE or ARABIC.
If Siyou would also like to search for encrypted chan-
nels, set the option to YES.
Then press QM to continue. A query about the digi-
tal antenna signal will appear.
Now you are asked to carry out the network settings. Select NO, if you want to skip this step. If you select YES, the
network options appear:
Here you can select the network type WIRELESS DEVICE or WIRED DEVICE.
If you are using USB Wi-Fi dongles, choose the option WIRELESS DEVICE as your network type and confirm
with QM. The television will scan for available wireless networks. Select the desired network. If this is secured, you
must enter the network password. See also the documentation that came with your wireless router.
If you have selected the setting WIRED DEVICE, a dynamic connection is automatically created as soon as you
connect the LCD TV to the Internet.
You can also enter a static IP address. To do this, press the green button to access the ADVANCED menu. Here you
can use the number buttons to enter the required IP address to connect your TV to the Internet. Using the red but-
ton, you switch between DYNAMIC and STATIC
Here you specify whether the digital antenna signal is to be fed in via AERIAL
(DVB-T) or CABLE (DVB-C). The search for digital TV channels will take place
according to this setting.
To stop the search at any time, press the OGPW button.
Search type setting: Antenna
To start the digital channel search, use the direction buttons to select
YES and then press QM. To cancel, use the direction buttons to select
NO and then press QM.
Search type setting: Cable
To start the digital channel search, use the direction buttons to select YES
and then press OK. To cancel, use the direction buttons to select NO and
then press QM.
After the end of the automatic channel programming, the channel appears. If the list is not processed further, it closes
after a few minutes.
If the channel list does not close automatically, press the OGPW button to exit the function.
NOTE!
The first time installation described here corresponds to the option FIRST TIME INSTALLATION in
the INSTALL AND RETUNE menu.
First time installation
Welcome please select your language!
Bienvenue ! Veuillez choisir une langue.
Willkommen, Wählen Sie bitte Ihre Sprache aus!
Benvenuti, Selezionate la vostra luingua!
Bienvenido, seleccione un idioma
Hoş geldiniz, lütfen dil seçimini yapınız!
Dobrodošli, izverite vaš jezik!
Välkommen, välj ditt språk!
Üdvözöljük, kérjük válassza ki a nyelvet!
Bem-vindo, favor selecionar seu idioma
Tervetuloa, velitse kielesi!
Velkommen, velg ditt språk
Select Language
Set Language
OK
First time installation
Welcome!
Country
UK
Search Type
Digital only
Teletext Language
West
Scan Encrypted Channels
Yes
Navigate
Choose your country
Do you want to start an automatic
English
Français
Deutsch
Italiano
Español
Türkçe
Slovenski
Svenska
Magyar
Português
Suomi
Norsk
Continue
OK
Please Select Digital Search Type
Aerial
Cable
channel scan?
Yes
No
15
EN
Advertisement
Table of Contents
