Table of Contents
Advertisement
7. Connecting devices
7.1. Connecting headphones
Connect headphones to the headphone jack ( ). You can adjust the volume in the menu SOUND, submenu HEAD-
PHONE. To mute the device's speakers while using headphones, press the
menu SOUND, submenu VOLUME
WARNING!
The use of headphones at excessive volumes can produce dangerous acoustic
pressure and lead to permanent hearing damage. Before pressing play, set the
volume to the lowest setting. Start playback and increase the volume to a com-
fortable level. Changing the basic settings of the equaliser can also increase the
volume and thus cause permanent damage to your hearing.
WARNING!
Using headphones/earphones to listen to a device at high volumes for an extend-
ed period can damage your hearing.
7.2. Digital amplifi er via coaxial connection
Via the SPDIF Coax. OUT connection, you have the option of outputting the audio signal of your LCD TV via a digital
amplifier.
To do this, connect a coaxial cable to the SPDIF Coax. OUT connection on the LCD TV and the corresponding input
on the amplifier.
7.3. Connecting a soundbar/surround sound system
If you would like to optimise the sound output by connecting a soundbar or surround sound system, the following con-
nection types are available:
On the SPDIF Coax. OUT connection
If your soundbar/surround sound system has a coaxial SPDIF connector, use a cinch cable (not included) to connect
this to the SPDIF Coax. OUT connection on the LCD TV.
If your soundbar/surround sound system has an optical SPDIF connector, use an adapter (optical to coaxial, not in-
cluded) to connect this to the SPDIF Coax. OUT connection on the LCD TV.
Via the headphone output
Use a 3.5 mm jack to 2 x cinch adapter (not included) to connect the headphone output ( ) of the LCD TV with
the sound inputs of the soundbar/surround sound system. In the menu SOUND, submenu HEADPHONE/LI-
NEOUT you should then select the setting LINE-OUT. After this, the volume of the headphone output can no
longer be set via the HEADPHONE option.
Via the SCART connection
Use a SCART to 2 x cinch adapter (not included) to connect the SCART connection of the LCD TV with the sound in-
puts of the soundbar/surround sound system.
7.4. Connecting a DVD/Blu-ray player
There are a number of options for connecting a DVD/Blu-ray player:
With a HDMI cable
If the DVD/Blu-Ray has an HDMI connection, connect an HDMI cable (not supplied) to one of the HDMI sockets on the
LCD TV. No additional cable is required for sound transmission.
button or turn down the volume in the
EN
19
Advertisement
Table of Contents
