Connecting A Video Recorder; Connecting A Dvd Recorder; Connecting A Receiver (Sat, Dvb-T, Decoder, Etc.) - Medion LIFE P18047 Instruction Manual

With a component video cable (3 x cinch to 3.5 mm jack)
 If the DVD/Blu-ray player has YUV outputs (YPbPr), it is recommended that you connect it to the YPbPr connection
on the LCD TV using cinch cables and the supplied YUV adapter cable (3 x cinch (green/blue/red) to 3.5 mm jack).
PLEASE NOTE!
Use only the supplied YUV adapter.
 For sound transmission, connect the supplied AV adapter to the SIDE AV connection and connect a stereo cinch ca-
ble (red and white plugs) to the corresponding sockets on the adapter and the audio inputs on the device.
PLEASE NOTE!
Use only the supplied AV adapter.
With a SCART cable
 Connect a DVD/Blu-Ray player to the SCART socket using a SCART cable. No additional cable is required for sound
transmission.
With an AV adapter
 Connect the AV adapter with the side AV connector on the LCD TV.
 Connect a stereo cinch cable (red and white plugs) between the AV adapter and the audio outputs on the external
device.
 Connect a video cinch cable (yellow plug) between the AV adapter and the video output on the external device.
PLEASE NOTE!
Use only the supplied AV adapter.

7.5. Connecting a video recorder

 Connect an antenna cable between the antenna socket on the LCD TV and the output on the video recorder.
 Connect an additional antenna cable between the antenna input on the video recorder and the antenna socket in
the wall.
You can also use a SCART cable to connect the LCD TV and the video recorder. This is recommended for high-quality
picture and sound quality. If you wish to transfer stereo sound, you will need a SCART connection.
 Connect the SCART cable to the SCART socket on the LCD TV.
 Connect the other end of the SCART cable to the SCART OUT socket on the video recorder.

7.6. Connecting a DVD recorder

 Connect one end of the SCART cable to the SCART OUT socket on the DVD recorder.
 Connect the other end of the SCART cable to the SCART socket on the LCD TV.
 Connect an antenna cable to the antenna socket on the LCD TV and the antenna output on the DVD recorder.
 Connect an additional antenna cable between the antenna input on the DVD recorder and the antenna socket in
the wall.

7.7. Connecting a receiver (SAT, DVB-T, decoder, etc.)

There are various options for connecting a receiver (e.g. SAT receiver, DVB-T receiver, decoder, set-top box) to your LCD
TV.
With a HDMI cable
 If the receiver has an HDMI connection, connect an HDMI cable (not supplied) to one of the HDMI sockets on the
LCD TV. No additional cable is required for sound transmission.
20